MODING D1 Cordless Brushless Nail Drill Machine

The MODING D1 Cordless Brushless Nail Drill is a professional-grade nail filing and polishing tool designed for salon use. Equipped with a brushless motor, TFT color display, and patented technology, it offers precise speed control, forward/reverse rotation, and ultra-quiet operation.

With a powerful aluminum alloy body and dual bearings, it reaches up to 30,000 RPM, providing stable, low-vibration performance. Its ergonomic handpiece fits comfortably in a female hand for effortless, prolonged use.

Built-in rechargeable battery charges in 3.5 hours and provides up to 7.5 hours of continuous operation.

Comes with a 1-year warranty for non-human damage. Shipping cost applies for service. We will open the package before shipping to prepare the warranty card; if you prefer it sealed, please notify us in advance.

MODING D1 无线无刷美甲打磨机，专业美甲店专用工具。配备无刷电机、TFT彩屏及专利技术，实现精准转速控制、正/反向旋转及超静音操作。

铝合金机身搭配双轴承设计，最高转速可达 30,000 RPM，动平衡低震感，手柄根据女生手掌设计，长时间使用舒适无负担。

内置充电电池，充电 3.5 小时可连续使用 7.5 小时。

提供 1 年售后保障（非人为损坏，运费自付）。寄出前会打开包装帮您写售后卡，如不想打开包装请提前通知。

1 MODING D1 Main Unit（主机 ×1 ）

1 Handpiece（手柄 ×1 ）

1 Charging Cable（充电线 ×1 ）

1 User Manual（说明书 ×1 ）

1 Warranty Card（售后卡 ×1 ）

3 Dust Plugs（防尘塞 ×3）

1 Handpiece Base（手柄底座 ×1 ）

1 Packaging Box（包装盒 ×1 ）

Brushless motor for high-speed and stable operation

TFT color display for easy speed monitoring

Forward/Reverse rotation (F/R) and adjustable speed 0~30,000 RPM

Aluminum alloy body with dual bearings for low-vibration performance

Ergonomic handpiece designed for female hands

Lightweight and portable, ideal for salon use

Long-lasting battery: 3.5h charge → 7.5h use

1-year warranty for non-human damage; shipping cost applies. The package will be opened before shipping to prepare the warranty card. If you prefer it sealed, please notify us.

无刷电机，高速稳定

TFT彩屏，轻松监控转速

正/反向旋转，转速可调 0~30,000 RPM

铝合金机身+双轴承设计，低震感高效

手柄符合女生手型设计

小巧轻盈，便于携带和沙龙使用

大容量电池，充电 3.5 小时 → 可连续使用 7.5 小时

1 年售后保障（非人为损坏，运费自付）。寄出前会打开包装帮您写售后卡，如不想打开包装请提前通知。

Remove the drill bit: Turn the handpiece collar clockwise following the arrow until it stops, then pull out the drill bit.

Install the drill bit: Ensure the collar is open, insert the drill bit into the collar, then turn the collar counterclockwise until it locks.

Connect the handpiece cable audio jack to the main unit "MOTOR" port.

Long press the power button to start the machine. Default start is paused; use the speed dial to adjust the handpiece speed, then lightly press the power button to operate.

The speed dial can adjust handpiece rotation from 0 to 30,000 RPM.

卸磨头：按图示箭头顺时针转动手柄旋套，直到旋到停止并拔出磨头。

装磨头：确保旋套打开状态，插入磨头到旋套位置，并逆时针方向旋转旋套，直到锁紧。

连接手柄线音频接头到主机"MOTOR”端口（音频连接器端口）。

长按开关键启动机器，开机默认暂停，旋转调速旋钮调节手柄转速，轻按开关键启动机器。

调速旋钮可从0~30,000转调节手柄转速。

Please read the user manual carefully before using the device.

Ensure the drill bit is fully locked before turning on the machine.

Avoid long periods of continuous high-speed operation; allow the device to rest to extend its lifespan.

Stop using the machine immediately if unusual vibration, noise, smell, or heat occurs.

Keep the device away from water, impact, or unauthorized disassembly.

Keep out of reach of children.

Warning:
This product is for professional use only.
We assume users are familiar with proper product usage.
We are not responsible for any injury or damage caused by improper use.

使用前请务必仔细阅读产品说明书。

启动机器前，请确保磨头已完全锁紧。

不建议长时间高速连续使用，为延长机器寿命请适当让设备休息。

如出现异常震动、噪音、异味或过热，请立即停止使用并联系我们。

请避免机器进水、摔落或自行拆解设备。

本设备为专业美甲工具，请勿让儿童接触或操作。

警告说明：本产品仅供专业用途。默认使用者已具备相关产品操作经验。因不当使用所造成的任何风险或损害，恕不负责。

Main Unit Size: approx. W 136.6mm × D 34.7mm × H 85.4mm

Handpiece Size: approx Φ18.7mm × L 136.37mm

Rotation Speed: 0~30,000 RPM

Motor: Brushless

Body Material: Aluminum Alloy

Battery: Rechargeable, 3.5h charge / 7.5h use

Warranty: 1-year warranty for non-human damage

Origin: China

主机尺寸：约 W136.6mm × D34.7mm × H85.4mm

手柄尺寸：约 Φ18.7mm × L136.37mm

转速：0~30,000 RPM

电机类型：无刷电机

机身材质：铝合金

电池：充电使用，3.5h 充电 / 7.5h 使用

售后保障：1 年（非人为损坏，运费自付）

产地：中国